New 1250W RC-20 Electric Rebar Cutter Cutting up to 3/4In 4-20mm Rebar+Jaw Blade

Description

New 1250W RC-20 Electric Rebar Cutter Cutting up to 3/4In 4-20mm Rebar+Jaw Blade
Description
Safe and efficient cutting is never just a dream! This 1250W electric rebar cutter will provide you with both a safe and efficient cutting experience. It can cut your rebar in about 3-3.5 seconds without sparking, providing you with a good working environment. And its rugged material will last you a long time!
Key Features
High Efficiency:
It uses a 1250W high-power motor that can cut or bend the steel for you in 3-3.5 seconds, which improves your work efficiency.
All-copper Motor:
The1250W pure copper coil motor driven by a hydraulic pump ensures the stability of the electric rebar cutter, which means it has excellent power and low noise to cut at lightning speed!
Wide Cutting Range:
It can cut rebar in the size range of 4-20mm (3/20"-3/4") for you, which can meet your various cutting needs.
Good Safety:
Compared with the traditional steel cutting method, the use of this product does not produce sparks and is without smell, bringing you a safer cutting operation.
Good Heat Dissipation:
It has a scientific exhaust hole design at the rear, which greatly improves the heat dissipation of the machine, making it more stable in operation while also extending its service life.
Easy to Use:
It's designed for one-touch operation, just plug it in, push the button, and start cutting in seconds!
Wide Applicability:
The cutter on its headstock is reversible on four sides and the cutter on the shaft can be reversible on two sides. And the adjustable bolt design makes it easy to cut different sizes of steel with hardness below 25.
Ergonomic Design:
Its rear handle and side handle are ergonomically designed to give you a comfortable grip and convenient operation, bringing you a better experience.
High Portability:
We provide a protective case with a handle for your electric rebar cutter and its proper weight for your daily use. And the interior of the protective case with foam lining can well prevent the machine from damage due to impact.
Durable Material:
The machine is made of hard cast iron, which has good corrosion resistance and rust prevention ability. Its blades are made of Cr 12 MoV with good hardness, so you can use it for a long time and still bring you better cutting results!
Customer Service:
We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.
Details
Loop Nut:
The front of the machine is designed with a loop nut, making it well-sealed and more stable so that you can use it for a long time.
Needle Roller Bearing:
It uses a needle roller bearing to drive the motor rotation, which can make the motor run more smoothly and achieve a minimum friction and minimum power consumption, bringing you a better user experience.
Multiple Screws:
The multiple screws fixed to the head ensure the safety and longevity of the electric rebar cutter.
Long Power Cord:
Its power cord is up to 2.5m/ 8.2ft, allowing you to work without constraint.
Oil Jug:
We have an oil jug for you to easily change or add hydraulic oil.
Application
It is suitable for construction sites, factory workshops, railroad construction, bridge construction, etc. It can cut or bend rebar, round steel, medium carbon steel, low carbon steel, etc. with a hardness of less than 25.
Specification
Model: RC-20
Color: Gray, Green
Use: Cutting off Steel Bars
Material: Cast Iron Machine, Cr 12 MoV Blade
Hydraulic Oil Type: 46# Hydraulic Oil
（
Not Included
）
Plug Voltage: U.S. Plug 110V
Power: 1250W
Power Cord Length: 2.5m/ 8.2ft
Cutting Range: 4-20mm (3/20"-3/4")
Cutting Speed: 3-3.5s
Product Size: 41*11.5*22cm/ 16.1*4.5*8.7in
Package Size: 48*19.5*28.5cm/ 18.9*7.68*11.22in
Net Weight: 13kg/ 28.66lbs
Gross Weight: 20kg/ 44.09lbs
Package Included
1* Electric Rebar Cutter
1* Protective Case
1* Oil Jug
2* Blades
Other Needed Accessories
Notes
Please place it horizontally on the headstock before use with the rebar at an angle of 90° to the central axis of the headstock.
Please do not use it to cut or bend materials that exceed the specified diameter or strength, as this may affect the service life of the machine.
Please release the switch immediately after cutting or bending to the end to avoid damage to the machine by keeping the switch pressed.
It is normal for the pump body to heat up after being cut off or bent about 50 times continuously, please wait until the pump body cools down to normal temperature before using.
Please periodically check whether the head frame, pump body, and other connections of the nut are loose, if loose, need to tighten, so as not to affect the use of the machine.
Please change the hydraulic oil every six months.
Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Brand
Unbranded
MPN
Does not apply
Tool Type
Electric Rebar Cutter
On Oct 31, 2022 at 01:39:14 PDT, seller added the following information: