NEW Heavy Duty Electric Hydraulic Rebar Cutter For up to 5/8" 16mm Rebar 800W

Description

NEW Heavy Duty Electric Hydraulic Rebar Cutter For up to 5/8" 16mm Rebar 800W
Description
Safe and efficient cutting is never just a dream! This 800W electric rebar cutter will provide you with both a safe and efficient cutting experience. It can cut your rebar in about 2.5-3 seconds without sparking, providing you with a good working environment. And its rugged material will last you a long time!
Features
High Efficiency: It uses an 800W high-power motor that can cut or bend the steel for you in 2.5-3 seconds, which improves your work efficiency.
Wide Cutting Range: It can cut rebar in the size range of 4-16mm (3/20"-5/8") for you, which can meet your various cutting needs.
Durable Material: The machine is made of hard cast iron, which has good corrosion  resistance and rust prevention ability. Its blades are made of Cr 12 MoV with good hardness, so you can use it for a long time and still bring you better cutting results!
Oil Jug: We have an oil jug for you to easily change or add hydraulic oil.
Application
It is suitable for construction sites, factory workshops, railroad construction, bridge construction, etc. It can cut or bend rebar, round steel, medium carbon steel, low carbon steel, etc. with a hardness of less than 25.
Specification
Model: RC-16
Color: Gray, Green
Use: Cutting off Steel Bars
Material: Cast Iron Machine, Cr 12 MoV Blade
Hydraulic Oil Type: 46# Hydraulic Oil（Not Included）
Plug Voltage: U.S. Plug 110V
Power: 800W
Power Cord Length: 2.5m/ 8.2ft
Cutting Range: 4-16mm (3/20"-5/8")
Cutting Speed: 2.5-3s
Product Size: 46*13*11.5cm/ 18.1*5.1*4.5in
Package Size: 51.5*16*22.5cm/ 20.28*6.3*8.86in
Net Weight: 8kg/ 17.64lbs
Gross Weight: 13kg/ 28.66lbs
Package Included
1* Electric Rebar Cutter
1* Protective Case
1* Oil Jug
1* Handle
2* Blades
Other Needed Accessories
Notes
1.Please place it horizontally on the headstock before use with the rebar at an angle of 90° to the central axis of the headstock.
2.Please do not use it to cut or bend materials that exceed the specified diameter or strength, as this may affect the service life of the machine.
3.Please release the switch immediately after cutting or bending to the end to avoid damage to the machine by keeping the switch pressed.
4.It is normal for the pump body to heat up after being cut off or bent about 50 times continuously, please wait until the pump body cools down to normal temperature before using.
5.Please periodically check whether the head frame, pump body, and other connections of the nut are loose, if loose, need to tighten, so as not to affect the use of the machine.
6.Please change the hydraulic oil every six months.
7.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Voltage
110V
Power
800W
Cutting Speed
2.5-3 Seconds
Max. Rebar Diameter
5/8" (16mm) #5
Min. Rebar Diameter
3/20" (4mm)
Hydraulic Oil Type
46#
Rebar Cutter Method
Hydraulic Driven Squeeze
Net Weight
8kg/ 17.64lbs
Gross Weight
13kg/ 28.66lbs
Machine Size(L x W x H)
46*13*11.5cm/ 18.1*5.1*4.5in
Storage Box Size(L x W x H)
51.5*16*22.5cm/ 20.28*6.3*8.86in
Applications
Construction, Rescue
MPN
Does Not Apply
Tool Type
Rebar Cutter
Model
RC-16
Color
Gray, Green
Use
Cutting off Steel Bars
Material
Cast Iron Machine, Cr 12 MoV Blade
Power Cord Length
2.5m/ 8.2ft
Brand
Unbranded
On Nov 2, 2022 at 18:35:32 PDT, seller added the following information: